Skip to main content

Morning Overview

Sixty driverless electric haul trucks now work a Tibetan copper mine at 17,700 feet

At 17,700 feet in Tibet’s Kailas Range, the air is thin, winters are brutal and finding people willing to drive heavy trucks for a full shift is a constant problem. The Zhibula Copper Mine’s answer is to stop needing them: 60 battery-electric haul trucks there now run without anyone in the cab.

Read next on Morning Overview: Over 20 trillion gallons of rain fell on the Four Corners states and Nevada in two weeks

The fleet, built by Chinese equipment maker SANY and automated by Perth-based Eacon Mining Technology, reached site-wide autonomous operation at the end of September. Eacon calls it the largest single-site autonomous haulage fleet at a metal mine in China and the world’s first site-wide autonomous battery-electric project above 5,000 meters.

A 60-truck electric fleet in the Gangdese Mountains

As Electrek’s Jo Borrás reported, the trucks are SANY SKT105ED models, each rated for a payload of 70 tonnes, or about 80 U.S. tons. The mine is operated by Zijin Mining and its subsidiary Tibet Julong Copper and sits in the Gangdese Mountains, the range also known as the Kailas Range.

The rollout moved quickly. According to The Driven’s account of the project, the electric trucks arrived on site in September, and by the end of that month all 60 had been converted and were operating autonomously across the site. Eacon says validation and operating data so far show an 80% reduction in driver requirements, a 16% increase in daily effective working hours and an expected cut of about 12,000 tonnes of carbon emissions a year.

The work is not stopping at Zhibula. Eacon is retrofitting 18 NTE240 electric rigid dump trucks at the neighboring Julong Copper Mine, also at up to 5,400 meters, and some of those 220-tonne trucks are already running autonomously while the rest complete validation for operation without safety drivers.

Thin air, cold and the case for removing the driver

Eacon’s argument for automation is mostly about people. In an October paper titled Why High-Altitude Mines Are Going Autonomous, the company notes that high-altitude illness becomes increasingly relevant above 2,500 meters. It cites research on workers at Andes mines between 3,800 and 4,500 meters that found 73% of those assessed had periods of nighttime oxygen saturation below 85% during their high-altitude shifts, a sign of moderate to severe hypoxemia.

“Autonomous haulage offers one way to address this challenge,” the paper says. Rather than one driver per truck, it argues, a fleet can be supervised centrally, and depending on the setup some operations can manage autonomous trucks from remote operations centers away from the mine, at lower altitude. Zhibula’s elevation is well beyond the mines Eacon uses for comparison: Quellaveco in Peru sits at about 3,500 meters and Collahuasi in Chile at around 4,400 meters.

The paper also lays out how far up these mines sit on the medical scale. It cites the U.S. National Library of Medicine’s bands: high altitude runs from 1,500 to 3,500 meters, very high altitude from 3,500 to 5,500 meters, and extreme altitude starts above 5,500 meters. Eacon says its deployments at the Julong and Zhibula copper mines extend above 5,400 meters, at the very top of the very-high band and close to the extreme threshold.

The equipment has to cope with those conditions too. The Driven notes that work above 5,000 meters means extreme cold, low atmospheric pressure, reduced oxygen and stronger ultraviolet exposure, a combination that is hard on people and on the sensors, batteries and controls that now do the driving. Supervisors still have to be on hand to intervene when the system calls for it, so the people do not disappear entirely; they move from the cab to a control role.

China’s mining fleets are electrifying at scale

Zhibula is one data point in a much larger shift. Eacon technology already runs more than 3,100 autonomous trucks across more than 40 large mines, including Zijin’s Zijinshan Gold-Copper Mine and the Norton Gold Fields project in Australia. SANY, for its part, shipped 200 electric dump trucks and 403 electric wheel loaders to customers in a single month this year, according to a company announcement covered by Electrek.

Competitors are moving at similar scale. In July, rival Chinese truck maker Tonly announced it would deliver 800 autonomous mining trucks to mining firm Xinjiang Hanxiang, adding to its fleets already running at major Xinjiang coal operations.

Zijin has been pushing electrification across its own operations as well. Its subsidiary Zijin Longking unveiled the ZL230E, described as the largest-tonnage battery-electric mining truck in China, earlier this year, and the group began building its own LK220E electric haul trucks in December 2025 after failing to find another supplier. By June, it had produced around 300.

For mine operators, the Zhibula numbers make the economics plain. An 80% cut in driver requirements matters most in places where every worker on site has to be housed, transported and medically monitored at extreme altitude. Whether the 16% gain in working hours holds up through a full Tibetan winter, when the cold is at its worst, is the next result to watch.

This article was produced with the assistance of AI and reviewed by Morning Overview editors prior to publication.


More from Morning Overview

Morning Overview is reader-supported. Some links in our articles are affiliate links, and we may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Full disclosure.