Eight Subarus assembled in August carry a left-front suspension nut that may not have been tightened enough, and Subaru of America has told owners of those cars not to drive them at all. Four are 2026 Crosstrek models and four are 2026 Forester models. For the few people the notice reaches, the instruction in the recall is to park the vehicle and arrange a tow to a dealer.
Read next on Morning Overview: Winter weather advisories cover I-80, I-70 and the Bighorns with up to 15 inches of snow
A ball joint that comes loose gives no warning first, according to Subaru’s report to the government, and a separation can cause a loss of control while driving. Autoevolution quoted the report’s description of the failure: the wheel is no longer properly connected, increasing the risk of a crash.
The castle nut on the left-front lower control arm
Subaru of America’s recall report, NHTSA campaign 26V685 (Subaru’s own number is WRI26), is dated Oct. 19, 2026. It says the castle nut on the left-hand front lower control arm ball joint may be insufficiently tightened, so the ball joint may separate from the control arm. The Crosstrek units were built Aug. 4 to 6 and the Forester units Aug. 5 to 13. Subaru estimates that all eight vehicles have the defect.
Autoevolution’s reading of the filing supplies the manufacturing story. Several left front lower control arm assemblies were moved to the finished-goods rack of the supplier, TOA of Indiana, before the final castle-nut torque step was done, and they shipped anyway. When Subaru of America later examined the reported vehicle, it found no recorded torque inspection pass result. Autoevolution said the cars come from Subaru of Indiana Automotive in Lafayette.
One field report, received Sept. 15, 2026, described a left-hand ball joint separation, and the investigation tied it to insufficient castle nut torque and loss of control while driving. Autoevolution said workers at the Lafayette plant began inspecting castle nuts on all completed vehicles the next day. The report does not describe crashes, injuries or deaths.
Autoevolution described the part’s job: the ball joint is the pivot that lets the wheel move over bumps and steer, so a separation disconnects the wheel from the control arm. That is why Subaru chose the strongest advisory it has, a do-not-drive notice, over a letter telling owners to schedule service at their convenience. Dealers were told to inspect and replace all potentially affected vehicles.
The calendar shows how a defect in a handful of cars moves through the system. The vehicles were assembled between Aug. 4 and Aug. 13, the field report came on Sept. 15, plant inspections started the following day, dealers were notified on Oct. 15, and the report to the government is dated Oct. 19. Owner letters, planned for Dec. 16, come about four and a half months after the first of the eight cars was assembled.
Do-not-drive advice, towing and the December 16 mailing
Subaru told dealers about the recall on Oct. 15 and plans to notify owners on Dec. 16, 2026, in a phased mailing. The remedy is an inspection at the dealer and replacement of the ball joint assembly where necessary, at no cost to the owner, with a replacement that has a properly tightened castle nut. Until then the advisory in the report is that the vehicles should not be driven and should be towed to the dealer.
The recall appears in VehicleServicePros’s Nov. 6 list of NHTSA recalls. Owners who want to check a car can use Subaru’s recall page or NHTSA’s recall lookup. Both work from the VIN, so anyone with a Crosstrek or Forester built in early August 2026 can confirm within minutes whether it is one of the eight.
A recall of eight against sales in the hundreds of thousands
The count is tiny next to the model lines involved. Autoevolution cited Crosstrek sales of 138,249 and Forester sales of 156,476 in the first nine months of 2026, a combined 294,725 vehicles, so the eight recalled cars amount to a few thousandths of one percent of what Subaru sold in that span.
The risk Subaru describes comes from a single fastener on one corner of the car, and the remedy swaps the whole ball joint assembly instead of retightening the nut in place. Dealers got their notice nearly two months before the planned owner mailing. Subaru’s report rests on one field report and a missing torque record on one vehicle. Subaru estimates that all eight have the defect, which is why the advisory applies to every vehicle on the list and not only to ones a dealer finds loose. Autoevolution said Subaru of America estimates eight vehicles were shipped to dealers, which leaves open how many of them reached customers rather than dealer lots, and the report does not give that number. Autoevolution also ranked the Outback third in Subaru’s U.S. sales through the third quarter, at 104,759 vehicles, none of which are part of this recall.
This article was produced with the assistance of AI and reviewed by Morning Overview editors prior to publication.
More from Morning Overview
- Two Kentucky residents died when a small plane crashed at Missouri’s Lake of the Ozarks, and the NTSB is investigating
- A handful of car transmissions are so tough that mechanics say they almost never die
- Melting permafrost is setting off a newly identified kind of catastrophic landslide, scientists say
- Cadillac cut the price of its cheapest EV, which goes up to 317 miles on a charge