A transmission is the part of a vehicle that owners tend to think about only when it fails, which is why the ones that never seem to fail earn near-mythic status. Five gearboxes, ranging from a four-speed Toyota automatic that dates to 1985 to a Ford heavy-duty six-speed built for towing, come up again and again when mechanics and owners talk about units that simply keep going.
Some of the reputation is supported by longevity data. Some of it rests on engineering reasoning and owner reports.
Toyota’s Aisin A340 and A750
SlashGear’s D Figg, in a Jan. 31, 2026 list, starts with the Aisin A340, a four-speed automatic first launched in 1985 and used in 1995-2005 Toyota Tacoma and Tundra trucks, where it could be paired with a 2.4-liter or 2.7-liter four-cylinder or a 3.4-liter V6. The article credits its standing partly to Toyota’s ownership stake in Aisin and notes that parts are cheap and online help is plentiful. It cites iSeeCars data giving the Tacoma a 25.3 percent chance of reaching 250,000 miles, which the article calls more than five times the average vehicle’s chance.
The second Toyota unit on the list is the A750, found in 2003-2024 4Runners across two generations. SlashGear says owners on forums such as Toyota-4runner.org report good experiences with the Aisin-built gearbox, and names solenoid failure as the most serious problem. The list gives no iSeeCars figure for the A750 itself.
The 4Runner overall does well in the data. On its longest-lasting study page, iSeeCars puts the truck at a 33.1 percent chance of reaching 250,000 miles, against 5.4 percent for the average vehicle. That is a vehicle-level number, so it cannot be credited to the gearbox alone.
The heavy-duty pickups: ZF in the Ram, TorqShift in the Ford
For the Ram 2500, SlashGear names the ZF eight-speed in 2019 and newer trucks with the 6.4-liter Hemi, and calls it “one of the most reliable transmissions of all time.” Stellantis’s Jan. 14, 2019 release for the 2019 Ram 2500 and 3500 Heavy Duty confirms the pairing in different words, listing the 6.4-liter Hemi V8 at 410 horsepower and 429 pound-feet with a TorqueFlite 8HP75 eight-speed automatic. The release does not identify the unit as ZF-built; SlashGear does. Bob Lee, FCA North America’s head of engine, powertrain and electrified propulsion, said in the release that “Heavy-duty pickups have the highest capability demands of any passenger vehicle.” In iSeeCars figures cited by SlashGear, the Ram 2500 has a 17.3 percent chance of reaching 250,000 miles, about 1.3 times the pickup segment average.
Ford’s 6R140 sits on the opposite end of the pickup spectrum. VehicleServicePros’ technical overview says the 6R140W, called the TorqShift 6, was introduced at the start of production for the 2011 model year in F-250 through F-550 Super Duty trucks, paired with the 6.2-liter gas engine or the 6.7-liter turbo diesel. It calls the unit “one beefy transmission weighing in at around 350 pounds” and describes a tow/haul mode that provides all six speeds at higher shift points.
SlashGear says the unit can handle “over 1,000 pounds of torque” and that Ford built it for hard work. iSeeCars figures it cites give the F-450 a 28.5 percent chance of reaching 250,000 miles, about 2.2 times the pickup average, while the lighter F-150, which used the related 6R80, manages 5.9 percent.
The stick shift on the list
The fifth entry is a stick: the Tremec TR-6060, listed by SlashGear in the 2015 Dodge Challenger and also used in the Chevrolet Camaro ZL1. The article says it is rated to handle 650 pound-feet of torque in both cars and uses larger, thicker, more load-bearing components than the older T56, including input shaft roller bearings, mainshaft bearings, synchros and gear cogs. The Challenger does not appear in the iSeeCars study, so SlashGear includes it on engineering grounds.
Tremec’s own history of the TR-6060 frames the design around balance. “It became the benchmark for how a modern high-torque manual transmission should perform,” the company writes, and it says the gearbox’s reputation “comes from balance rather than excess.” The post gives no torque rating or launch year, and names no specific vehicles, though it describes high-capacity gearsets, synchronizers meant for reliable shifting at high rpm, and case rigidity to limit deflection under load.
Limits of the iSeeCars evidence
The five-item list mixes three kinds of proof: iSeeCars longevity odds for whole vehicles, mechanical design arguments, and forum reports. SlashGear itself notes that results depend heavily on maintenance, climate and individual vehicle history, and that it excluded new cars because longevity data was lacking. Its own screening method was to check models on AutoTempest and favor those commonly seen above 100,000 to 150,000 miles.
The open question is how well the older units’ records carry over to the replacements, since the list covers gearboxes in production from 1985 to 2024 and the longevity studies depend on vehicles that have already piled up the miles.
This article was produced with the assistance of AI and reviewed by Morning Overview editors prior to publication.
More from Morning Overview
- Shaq spent $1.3 million on three Rolls-Royce Phantoms to prove a point to a salesman
- The Justice Department asked courts to undo approvals for three offshore wind farms, one already making power
- Over 20 trillion gallons of rain fell on the Four Corners states and Nevada in two weeks
- 11 engines built to run well past 200,000 miles