Skip to main content

Morning Overview

A United Airlines tech outage held departing flights days after the nationwide ground stop

For United Airlines passengers already buckled in on Monday afternoon, the delay came with an unusual explanation from the cockpit: the airline’s computers could not produce the numbers pilots need before they are allowed to take off. Departing United flights were held while the carrier worked through what it called a technology issue.

Read next on Morning Overview: A $1 billion gas plant planned for Superior, Wisconsin, has been abandoned

United said the problem was fixed by 6:13 p.m. Eastern time. The disruption landed less than a week after a failure in air traffic control communications and radar led the Federal Aviation Administration to halt takeoffs across the country.

Departures held, flights in the air unaffected

United first acknowledged the trouble on social media. “[United is] troubleshooting a technology issue affecting departing flights,” the airline posted. “There is no impact on flights in progress, or on United Express flights.” Later it said: “Earlier today [United] experienced a technology-related issue that impacted some departing flights. The issue has been resolved.”

The airline did not describe the cause. According to The Verge’s Richard Lawler, posts from people aboard United planes said pilots told them a systemwide IT outage had disabled a weight and balance calculator, which stopped crews from getting clearance to take off. That account came from passengers relaying what they heard, not from United, which had not confirmed which system failed.

Weight and balance numbers describe how heavy an aircraft is and how its passengers, bags and fuel are distributed. In the passengers’ telling, crews could not get takeoff clearance without them, which would explain why departures stalled while flights already airborne carried on normally. A failure in that kind of back-office software can stop an airline even when its aircraft, crews and runways are all ready to go.

A repeat of United’s August 2025 meltdown

If the passengers’ accounts are right, United has been here before. On the evening of August 6, 2025, a tech outage forced the airline to hold mainline flights at their departure airports nationwide. United said that disruption stemmed from its weight and balance computer system. It began shortly after 6 p.m. Eastern time, lasted a few hours and left more than 1,000 flights delayed and more than 40 canceled, according to FlightAware. FAA notices showed ground stops requested at Newark, San Francisco, Chicago, Denver and Houston.

“Due to a technology issue, [United is] holding United mainline flights at their departure airports,” the airline said then. Transportation Secretary Sean Duffy said that issue was specific to United and “unrelated to the broader air traffic control system,” and the airline told ABC News it was not a cyberattack. The next day, United said “the underlying technology issue has been resolved” but warned of residual delays, and it covered meals and hotels for affected customers. Associated Press coverage of that night noted that flights to Chicago, Denver, Newark, Houston and San Francisco were all affected.

The FAA said in 2025 that it was aware United had "experienced a technology issue disrupting their operations," and the airline’s ground stops at its biggest hubs rippled into delays at airports across the country. Monday’s disruption was narrower in its reported scope, but it pointed at the same weak point: a single back-office system that every mainline departure depends on.

A bad few weeks for the systems behind U.S. flying

The timing made the outage hard to ignore. The Verge noted that it came less than a week after the FAA’s nationwide halt to takeoffs, as well as a global Microsoft Outlook shutdown the week before. United’s own technology failure was unrelated to the federal air traffic system, but travelers felt both as the same thing: planes that would not leave the gate.

The air traffic system has had its own string of failures this year. On September 21, the Philadelphia terminal radar approach control facility lost a primary communications circuit after its backup fiber had already been cut that morning. Ground stops spread from Teterboro and Philadelphia to Newark, JFK and LaGuardia for roughly seven hours. “[The FAA is] pulling copper up and putting fiber down, but it’s the same data architecture that [the FAA has] had for 50 years,” FAA Administrator Bryan Bedford said at the time, according to CNN. By 6 p.m. Eastern that day, FlightAware showed about 619 cancellations at Newark and 197 at Philadelphia, and Transportation Secretary Duffy said shortly after 5 p.m. that the lines had been repaired and flights were resuming.

United has not said how many flights were delayed on Monday or what failed. Its statement told customers to check flight status in its app, and it gave no sign that the problem lasted into the evening schedule after the 6:13 p.m. fix. Whether this was the weight and balance system again, as pilots reportedly told passengers, is the question the airline has yet to answer.

This article was produced with the assistance of AI and reviewed by Morning Overview editors prior to publication.


More from Morning Overview

Morning Overview is reader-supported. Some links in our articles are affiliate links, and we may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Full disclosure.