Skip to main content

Morning Overview

Toyota is recalling Tundra pickups again because their camshafts could snap while driving

A camshaft that snaps at highway speed takes the engine’s power with it, and that is the danger Toyota described on Friday, Nov. 13, when it announced a recall of about 62,000 Tundra pickups. The company traces the flaw to a single production lot from one supplier and estimates that only about 300 camshafts from that lot were installed in the trucks. Every vehicle in the recall population still goes to a dealer for a check.

Read next on Morning Overview: Shaq spent $1.3 million on three Rolls-Royce Phantoms to prove a point to a salesman

One supplier lot and an estimated 300 camshafts

The recall covers non-hybrid Tundras from model years 2022-2023 and 2025-2026 sold in the United States. Toyota says an engine camshaft may have been manufactured incorrectly. The supplier is not named.

Toyota’s recall announcement, dated Nov. 13, says an affected camshaft “could snap during driving.” A snapped camshaft can cause a loss of motive power at higher speeds, which raises the risk of a crash. The release carries no statement from a named Toyota executive, and its media contact is Jacob Brown, so the company’s position rests on the written notice. The Drive reported the same figures on Nov. 13, including the 300-camshaft estimate and the 62,000-truck population.

A camshaft is the rotating shaft that opens and closes an engine’s valves in step with the pistons, so one that breaks mid-stroke leaves a cylinder bank without valve timing and the engine can quit without warning. Toyota’s wording stops at loss of motive power at higher speeds. It does not describe a crash, an injury or a specific number of field failures tied to the camshaft lot, and the release lists none.

Set the two numbers side by side and the lot looks small. If each of the roughly 300 parts sits in a different truck, fewer than one Tundra in 200 carries one. The ratio is simple division of Toyota’s own figures, not a number the company published, and the release does not say how the suspect parts are spread across the four model years or whether they cluster in a particular build period, which would narrow the search.

Dealer inspection and the mid-January 2027 owner letters

Toyota’s fix is a two-step visit. Owners are asked to bring the truck to a Toyota dealer, where a technician checks whether the installed camshaft came from the affected lot. A camshaft from that lot is replaced at no cost to the owner, and a truck with a camshaft from any other lot goes home without a repair.

Notification letters are due by mid-January 2027, which leaves roughly two months in which owners of a 2022-2023 or 2025-2026 Tundra can look up their own vehicle. Toyota points owners to its recall lookup and to the federal NHTSA recall database, both of which accept a VIN, and to its Brand Engagement Center at 1-800-331-4331. The 2024 model year is absent from the population, which matters because that year already sits inside a separate engine recall described below.

Automotive World’s summary of the release notes that only about 300 camshafts from one supplier lot are thought to be affected, yet every truck in the recall will still be inspected. Its reading is that the lot cannot be traced to individual trucks, so a physical check at the dealer is the only way an owner finds out which side of the line a given Tundra falls on.

Three engine recalls on the same pickup since May 2024

The camshaft notice lands on a truck with a long recall record. In May 2024 Toyota recalled 102,092 vehicles, 2022-2023 Tundras and Lexus LX 600 SUVs, over machining debris left inside the twin-turbo V6, according to the history compiled by Pickup Truck Talk. A second recall in November 2025 pushed that total to 126,691 vehicles, 113,079 of them Tundras, and added the 2024 model year.

A third action followed on May 20, 2026. NHTSA’s acknowledgement letter for campaign 26V320 lists about 43,566 2024 Tundras with the V35A engine, and Toyota’s own May newsroom release rounds that to about 44,000 and says some debris may remain and damage the number 1 main bearing. Published totals differ by outlet because the campaigns overlap; The Drive counts more than 270,000 vehicles across the three earlier recalls.

The earlier recalls also show how slowly a repair can arrive. Toyota’s May 2026 release says dealers had repaired more than 77,000 of the roughly 102,000 vehicles in the 2024 recall, and the final remedy for the later bearing recall was still being prepared when that release went out. Camshaft owners are being offered a different kind of fix, a check against a known lot and a part swap where needed, rather than a repair still under development.

Toyota has not said whether the camshaft lot has anything in common with the machining-debris problem. The Nov. 13 release describes the camshaft as incorrectly manufactured, a different defect from the bearing damage, and it leaves open whether the same supplier or plant is involved.

This article was produced with the assistance of AI and reviewed by Morning Overview editors prior to publication.


More from Morning Overview

Morning Overview is reader-supported. Some links in our articles are affiliate links, and we may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Full disclosure.