The TP-Link Archer C7 and Archer C6 have sat on shelves, desks and closet floors in millions of homes for years, the kind of budget router that gets plugged in once and never thought about again. TP-Link has now disclosed security flaws in both, and the fix only arrives if someone goes looking for it.
Read next on Morning Overview: The Justice Department asked courts to undo approvals for three offshore wind farms, one already making power
The flaws center on encryption keys hardcoded into the routers’ firmware, identical on every unit. On the Archer C7 V5 and Archer C6 V2, an attacker who gets hold of the right data can use those keys to recover the router’s administrator password, and on the C7, Wi-Fi credentials stored in a configuration backup.
Seven CVEs across two routers and an extender
TP-Link published two advisories this fall, and Hong Kong’s computer emergency response team summarized the full set in a November 5 bulletin covering seven CVEs. The bulletin lists the Archer C7 below firmware 1.3.1 Build 20260821, the Archer C6 below 1.2.1 Build 260902, and the RE305 Wi-Fi range extender below 1.1.8 Build 20260921 as affected, and describes the possible impact as elevation of privilege, information disclosure and remote code execution.
The details in TP-Link’s own advisories show that the most dangerous of those flaws sit in the extender. In its advisory for the RE305 V3 and Archer C7 V5, TP-Link describes CVE-2026-102814 as an authentication weakness in the RE305’s TDDP v2 service that “may allow an unauthenticated attacker on the same local area network to execute arbitrary system commands with root privileges.” It is rated 8.7, the highest score in the set. A breakdown of the advisories by ModemGuides counts six flaws on the RE305 V3, two on the Archer C7 V5 and one on the Archer C6 V2.
What the flaws expose on the Archer C7 and C6
For Archer C7 V5 owners, the first flaw, CVE-2026-18330, is a shared RSA-1024 private key used to protect the router’s web login. “The same RSA-1024 private key is stored within firmware configuration files and reused across devices,” TP-Link wrote. An attacker who obtains that key and captures an HTTP login session to the router’s web interface can decrypt the administrator password. The Rapid7 vulnerability database entry scores it 6.1 under CVSS 4.0, with an attack vector of an adjacent network rather than the open internet.
The second C7 flaw, CVE-2026-102812, uses a fixed AES-128 key and initialization vector to encrypt configuration backups. Anyone who obtains a backup file can decrypt it with the key extracted from the firmware, exposing “sensitive configuration information contained in a backup file, including administrator passwords and Wi-Fi credentials,” according to the advisory. Router owners often save those backups to a computer or cloud folder, where they can end up far from home.
The Archer C6 V2’s flaw, CVE-2026-89052, follows the same pattern. TP-Link says the router uses “a universal cryptographic key shared across devices,” so an attacker who obtains an encrypted configuration file or other protected credential data “can recover plaintext credentials,” including administrative credentials, according to TP-Link’s advisory for the Archer C6.
A hardcoded key is a secret that is identical on every unit sold, which means anyone who extracts it from one device has it for all of them. Each of these attacks requires an extra step, such as access to the local network, a captured login or a copy of a backup file. But an administrator password is the key to the whole router: with it, an attacker can change DNS settings to redirect traffic, open ports, or install modified firmware.
The fixed firmware and how to get it
TP-Link has posted fixed firmware: Archer C7 V5 at 1.3.1 Build 20260821, Archer C6 V2 at 1.2.1 Build 260902 and RE305 V3 at 1.1.8 Build 20260921. The U.S. download for the Archer C7 was posted on November 3, 2026, according to ModemGuides. TP-Link said it strongly recommends that owners of affected devices update to the latest firmware, and warned that devices that are not updated or mitigated “may remain vulnerable.” The advisories do not say whether any of the flaws have been exploited in attacks.
Many older routers do not update themselves. The hardware version is printed on the label underneath the device, and the installed firmware version appears in the router’s web interface. Owners of affected units can download the fixed build from TP-Link’s support page for their exact model and hardware version, then install it through the router’s firmware upgrade menu. After updating, changing the administrator password and Wi-Fi password is a sensible step, since the old ones may already have been exposed.
Older hardware versions of these models are not named in the advisories. ModemGuides advises owners of an Archer C7 V1 through V4 or an RE305 V1 or V2 to check the download page for their version and to plan on replacing the unit if no 2026 firmware is listed.
This article was produced with the assistance of AI and reviewed by Morning Overview editors prior to publication.
More from Morning Overview
- New FCC rules on how people can stop robocalls and texts take effect Nov. 25
- Neanderthals in Spain carved a wooden object that matches nothing archaeologists have ever found
- The FAA wants $2.39 million from a flight school it says flew a Cessna about 280 times with an unapproved part
- A $1 billion gas plant planned for Superior, Wisconsin, has been abandoned