Skip to main content

Morning Overview

A loose battery fastener can cut drive power in early Rivian R2 SUVs

Fourteen families who took early delivery of Rivian’s new R2 SUVs may have a high-voltage battery bolt that was never tightened to specification. If the connection works loose, the vehicle can lose drive power with no advance warning, a failure mode Rivian itself described to federal regulators.

Read next on Morning Overview: Czech Skyfox jets could become Ukraine’s cheap answer to Shahed attack drones

The recall is tiny by industry standards, but it lands on the most important vehicle in Rivian’s lineup. Letters to owners and a public VIN lookup are both scheduled for Nov. 28, a week out, and the repair is free.

The 14 trucks and the one bolt

Rivian filed the defect report with the National Highway Traffic Safety Administration on Sept. 29, 2026, under NHTSA campaign 26V625, which Rivian numbers FSAM-1888. It covers 14 model-year 2027 R2 vehicles built between May 18 and Aug. 27, 2026. The filing estimates that 100 percent of those 14 carry the defect, and it names the part: a bolt, number SC00036202-D, connected to the high-voltage battery.

According to the same report, a fastener connected to that battery “may be improperly torqued,” and the vehicle may then lose motive power without prior warning. The report adds that no warning is known to occur beforehand. Loss of motive power without warning “may increase the risk of a crash,” the filing says. Rivian told NHTSA it knows of no crashes, injuries, deaths or customer reports tied to the condition. The consumer advisory attached to the report reads “Do Not Drive Park Outside,” a standard NHTSA phrase for recalls in which the manufacturer wants the vehicle kept parked.

How a factory operator caught it

The chronology in the filing is short. A manufacturing operator found an under-torqued fastener on Sept. 17, 2026. Rivian investigated from Sept. 17 to Sept. 24 and decided on Sept. 24 to conduct a voluntary recall.

TechCrunch’s Sean O’Kane reported on Oct. 2 that the fastener had been flagged as “under torqued” by an “automated station” on the assembly line in Normal, Illinois, and that Rivian reprogrammed the station to reject improperly torqued fasteners. The same report quoted Rivian saying the affected vehicles were at service centers “being inspected to properly torque the fastener or replace damaged components at no cost to customers.”

Rivian’s own support page for the recall, which lists an issue date of Sept. 29 and a remedy-available date of Oct. 2, states that the affected vehicles are already at Rivian Service Centers and that the company says it has already contacted every customer whose vehicle is included. A separate account of the filing, by AutoGuide, says Rivian stopped building vehicles with the potentially affected fastener on Aug. 27, 2026, the last production date in the recall.

Paperwork dates that still lie ahead

Because the recall is phased, the paper trail runs behind the repairs. Rivian told NHTSA it would mail owner notifications on or before Nov. 29, 2026, with a planned remedy notification date of Nov. 28, the day the VIN of each affected vehicle becomes searchable. Work Truck Online’s November 2026 recall roundup, published Nov. 16, lists the Rivian entry with the same 14 units and the same Nov. 28 letter date.

The remedy itself is simple. Technicians inspect the connection and either torque the fastener correctly or replace damaged components, according to the NHTSA filing. No charge applies. One wrinkle is that Rivian’s support page says no action is required from owners because contact has already been made, while the NHTSA schedule still shows formal letters going out at the end of November. The two are not contradictory in practice: the recall report describes a phased process, and the support page describes the company’s direct outreach to the 14 owners.

A second R2 recall in a launch year

The bolt recall is not the R2’s first. Not a Tesla App, writing on Oct. 4, called it the second R2 recall; the first, a month earlier, covered roughly 100,000 R1 and R2 vehicles for a rearview camera software bug and was fixed over the air with no service visit. That site also noted that Rivian had grounded some R2s for high-voltage circuit fastener inspections the month before and had not publicly commented on those checks.

The timing matters because the R2 is Rivian’s first mass-market vehicle. TechCrunch reported that deliveries began in June, that Rivian planned to ship 20,000 to 25,000 R2s by the end of 2026, and that the company was adding a second production shift at Normal to get there. Fourteen vehicles out of that ramp-up is a small slice, and the filing’s 0-to-100 percent defect estimate applies only to those 14 built in the May-to-August window.

The open question is how a station designed to catch under-torqued fasteners let one through. The NHTSA filing says the station was reprogrammed, but it does not explain why it failed in the first place. Whether the 14 early builds turn out to be the full extent of the problem will be visible only if Rivian files an amended report after the Nov. 28 notification date.

This article was produced with the assistance of AI and reviewed by Morning Overview editors prior to publication.


More from Morning Overview

Morning Overview is reader-supported. Some links in our articles are affiliate links, and we may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Full disclosure.