The U.S. Consumer Product Safety Commission has recalled a line of electric pressure washers sold on Amazon after finding they lack basic shock protection. The YERYORK-branded units, sold under model number YE-006, were pulled from the market on August 27, 2026, because they can expose users to a serious risk of shock or electrocution. Roughly 300 of the machines were sold, but the defect they share is showing up across an entire category of budget imported pressure washers.
What Is Missing Inside the YE-006
According to the CPSC’s recall notice, the recalled pressure washers lack an integral ground-fault circuit-interrupter, commonly known as a GFCI, and are fitted with a power cord that the agency describes as inadequate in length. Both gaps matter for a tool that is, by design, used outdoors with a garden hose, a foam cannon and standing water nearby. The 2.5 GPM electric units are green and black, measure about 10.24 inches deep, 16.14 inches wide and 12.01 inches high, and ship with a 500-milliliter foam cannon, four quick-disconnect nozzles, a 32.81-foot hose and four lockable wheels. The brand name is printed on the front, and the YE-006 model number appears on a label near the handle.
Why a Missing GFCI Is a Fire-and-Shock Problem
A GFCI works by continuously comparing the current flowing into a circuit against the current flowing back out. If even a small amount leaks away, such as when water or a person’s body creates an unintended path to the ground, the device cuts power in a fraction of a second, long before a fatal shock can build up. Underwriters Laboratories’ UL 943 standard governs how these devices must perform, and the National Electrical Code has required GFCI protection on outdoor receptacles and other wet-location circuits for years precisely because water and electricity are a lethal combination. A pressure washer without that built-in cutoff, paired with a cord short enough to tempt an extension cord in the yard, removes the layer of protection that is supposed to catch a fault before it reaches a person’s hand.
The Sales History and the Manufacturer Behind It
The recalled washers were sold exclusively on Amazon.com from March 2025 through June 2026 for about $120 apiece. The CPSC lists the manufacturer as Lanzhou Xinshi Mingchen Information Technology Co., Ltd., doing business as YERYORK, based in China, where the units were also manufactured. The commission’s notice records no reported incidents or injuries tied to the YE-006 so far, which puts this recall in the category of a defect caught and addressed before it produced a documented casualty rather than one issued in the wake of a known accident.
A Recurring Hazard Across the Pressure Washer Market
YERYORK is not an isolated case this season. The CPSC’s own list of related recalls shows the identical hazard language, missing GFCI protection paired with an undersized power cord, attached to Steelite-branded washers imported and sold on Amazon by Longer 3D, to Workbless-branded units, and to machines from SUGIFT and COMMOWNER, the latter imported by AZ Home Concept. In several of those cases, investigators noted that a short factory cord effectively pushes buyers toward using a household extension cord outdoors, which compounds the risk if the extension cord itself is not rated for wet locations. The repetition across several unrelated brands points to a supply chain issue rather than a one-off design mistake, since multiple import labels appear to be selling washers built to a similar spec that skips ground-fault protection altogether.
When a Company Refuses to Recall at All
Not every manufacturer cooperates once the CPSC identifies the same defect. In a separate case involving SEN-QII pressure washers, also sold on Amazon for $79 to $100 and also missing an integral GFCI, the Chinese manufacturer refused to agree to an acceptable recall. With no company willing to fund refunds or a repair program, the agency issued a public safety warning instead, telling owners to stop using the units immediately, cut the cord themselves and dispose of the machine, with no reimbursement offered. That gap between a recall and a warning matters to anyone trying to gauge risk: a formal recall generally means a company has agreed to make affected customers whole, while a warning can mean the opposite, that regulators found a real hazard but had no cooperative party on the other end of it. Both outcomes land in the same place for the person using the machine, which is that the pressure washer needs to be unplugged and destroyed rather than used or passed along to someone else.
What the Recall Requires of Current Owners
Owners of the recalled YE-006 are told to stop using the pressure washer immediately and contact YERYORK for a full refund. The remedy process is unusually hands-on: owners must unplug the unit, cut the power cord in half to destroy it, and email a photo of the destroyed cord and the visible model number to the company’s recall address before disposing of the unit. That destroy-and-document step is standard CPSC practice for recalls where a company wants assurance that a hazardous product will not simply be resold or handed down rather than removed from circulation. The recall carries CPSC number 26-725, and the agency’s broader message extends past this single model: any pressure washer that lacks a visible GFCI reset button on its plug or housing is worth checking against the current recall list before it gets used near a hose bib this fall.
This article was produced with the assistance of AI and reviewed by Morning Overview editors prior to publication.
More from Morning Overview
