The drones that have become a staple of modern combat are cheap, simple and needed in huge numbers, which makes the long supply chain from factory to front a problem in itself. A California robotics company now has Pentagon money to test a different approach: robotic factories that ship in standard containers and build attack drone airframes near where they will be used.
Read next on Morning Overview: Shaq spent $1.3 million on three Rolls-Royce Phantoms to prove a point to a salesman
Machina has received a $9 million award to show that its containerized RoboCraftsman system can produce airframes for the Low-Cost Uncrewed Combat Attack System, or LUCAS, the U.S. military’s reverse-engineered copy of Iran’s Shahed-136, at deployed locations.
A $9 million award and two Edge Factories
As The War Zone reported, the 18-month contract comes from the Defense Department’s Organic Industrial Base Modernization Challenge. Machina founder and CEO Ed Mehr said the company will first set up so-called Edge Factories at two locations in the continental United States, with the ultimate goal of deploying them to forward locations in countries such as Kuwait. A decision on producing at scale in many more places will come later.
Each Edge Factory will use one or two RoboCraftsman cells. A cell measures 20 by 36 feet, weighs 120,000 pounds fully installed and folds to ship in two standard ISO containers. Inside, two robotic arms form the airframe from sheet metal based on requirements such as payload weight and range entered into design software from the company nTop, avoiding the dies and rolls a conventional line would need. Mehr said each cell can make a LUCAS airframe in two to five days, depending on size, and that a scaled deployment of 10 or more cells would require a new contract.
The company pitches the approach broadly. Machina describes itself as building “intelligent, software-defined factories that turn design intent into complex metal structures,” and markets “Airframes-as-a-Service through deployable elastic factories” that form skins and structures for military aircraft and weapons without tooling. It also sells the same forming technology for automotive body panels.
Software does much of the design work. “Basically, the agentic AI agents can explore and generate whole different versions of an airframe with different parameters,” Mehr said, adding that the system “can easily generate 20, 30, 40, 50 different designs just in software” and simulate which one meets a requirement. The idea, he said, is to tailor drones for different theaters, such as the Pacific, the Middle East or Ukraine.
Airframes for $15,000 to $40,000
Mehr estimates that each 12-foot airframe will cost “somewhere around $15,000 to $40,000,” depending on complexity, a range comparable to Shahed-136 variants and U.S. copies. Output could run from “a one-off all the way to the thousands, sometimes tens of thousands,” depending on how many RoboCraftsman systems are ordered.
Testing has started, with setbacks. A six-foot, half-scale airframe built by the system flew at Edwards Air Force Base, but Mehr said the first design had trouble with crosswinds. The company moved the engine slightly and resumed testing, and Mehr said iterating to a new design takes a couple of months, three at most. Machina is not working with SpektreWorks, which designed the LUCAS drones already supplied to the military and used in combat; SpektreWorks declined to comment.
The company’s robotic forming has already reached a frontline aircraft of a different kind. In August, Machina said a structural repair made by RoboCraftsman flew for the first time on a damaged C-17, a left nose panel produced at the Air Force Rapid Sustainment Office without dedicated tooling, returning the transport to flight on July 30.
LUCAS and the race to build drones forward
LUCAS has moved quickly from experiment to weapon. The U.S. military announced it was fielding the drone in December 2025, and it made its combat debut in the opening phase of operations against Iran this year, launched from the ground and also capable of being fired from ships. Michael Horowitz, a former deputy assistant secretary of defense whose office reviewed the concept, described to TWZ how the idea reached his office in May 2024.
Machina is one of several companies chasing forward drone production. Aevex’s ForgeX containerized 3D printing system can produce up to 880 drones a year, said Craig Anders, the company’s senior vice president of growth, describing it as a way to “print drones on demand, print them out towards the front of the lines, cut down the logistics trail.” Earlier efforts took a similar path: in 2023 the Air National Guard and Air Force Special Operations Command worked with a San Diego company on an expeditionary manufacturing cell. “It’s basically an expeditionary 3D Printer,” said Master Sgt. Richard Stone of the 194th Air Support Operations Group.
The Machina contract will test whether robot-formed metal airframes can join that mix. The 18-month award is meant to prove the factories work at two U.S. sites; whether they end up near a front line depends on the larger contract Mehr says would follow.
This article was produced with the assistance of AI and reviewed by Morning Overview editors prior to publication.
More from Morning Overview
- Winter weather advisories cover I-80, I-70 and the Bighorns with up to 15 inches of snow
- Arizona’s governor declared a statewide emergency after Flagstaff logged its wettest Nov. 1 on record
- Zero Motorcycles unveiled an electric motorcycle targeted at under $8K and a street-legal dirt bike at EICMA
- New FCC rules on how people can stop robocalls and texts take effect Nov. 25